JLR VCI & DOIP (Bosch), SDD Software & FZ-55 Laptop Bundle (Ultimate)

SKU:
£3,795.00
£3,795.00
Unavailable
per item

Prices are Subject to 20% VAT (UK Customers Only) Other countries May Be Subject to Import Duties and Local Taxes,



Jaguar & Land Rover Dell Latitude 14 Rugged Laptop Diagnostic Package With 1 Year Subscription to TOPIx

Bundle includes Panasonic FZ-55 HD Rugged Laptop, JLR VCI, JLR DOIP-VCI, SDD and Pathfinder Software Installation, and Registration to TOPIx.

​

What's In The Box:

1 x Panasonic FZ-55 HD Rugged Laptop & Mains charger

1 x JLR VCI Interface

​1 x JLR DOIP-VCI Interface

Sold Out
Approved Jaguar & Land Rover Vehicle Application List
JLR SST Service Applications

SIR – Service Interval Reset
This application resets the service light and/or oil change reset depending on the vehicle. 
EPBR – Electronic Park Brake Release
Moves the electronic park brake to the mount position and then releases the brake calipers.
DPFDR – DPF Dynamic Regeneration
The DPFDR application allows the vehicles DPF dynamic regeneration process to be undertaken to clear the DPF of soot build up.
Oil Level Measurement
Displays current engine oil level instantaneously on screen with a bar graph and actual levels.
Diesel Exhaust Fuel (DEF)
Allows the Diesel Exhaust Fluid (DEF or AdBlue®) level to be constantly monitored, and displays the amount required to refill the tank.
TM Toggle – Transport Mode Toggle
The Transport Mode Toggle application allows the vehicle to be placed in and out of Transport mode including speed limit and air suspension depending on vehicle variant.
TTM Toggle – Tight Tolerance Mode Toggle
The Tight Tolerance Mode Toggle application allows the vehicle to be placed in and out of Tight Tolerance mode depending on vehicle variant.
Force Ignition
The Force Ignition Application turns the vehicles ignition on and holds it in the on position for as long as the JLR SST is connected to the vehicle and the application is running.

Can also be connected to Hub Software for App updates and firmware upgrades when available. 

JLR SST App Hub Setup
The JLR SST App Hub is a PC based application that is installed to allow you to check for software updates with release information for your JLR SST device.The PC that this application is installed on needs to be connected to the internet to allow software updates to be downloaded automatically to your JLR SST device.Please Note : After installation of the JLR SST App Hub you need to connect your JLR SST device to your PC via the USB cable BEFORE you run the JLR SST App Hub for the first time. This is necessary to complete the device driver installation.

    Enquire about this product
Panasonic FZ-55 FD Specification
Processor: Intel Core i5 Dual-Core
Hard Drive: 500GB SSD M2
RAM: 8GB
Touch Screen: No
Condition: New

Jaguar & Land Rover SDD Software first installation and set up including registration to:  JLR_TOPIx

SDD Software

This is the official software used by Jaguar and LandRover workshops in the EU.

- It will allow the user to:    
- Read and delete all fault codes.
- View live Data and record it and play it back
- Actuate Components for testing
- Program and configure modules online
- Replace modules
- Carry out special functions like DPF Regens, Injector Calibrations, Release Park Brake & much more
User can perform Symptom Based Diagnostic which will aid the technician to pinpoint fault quicker also the use of workshop manuals and wiring diagrams with additional subscriptions to TOPiX.

What We Do For You.
We will install the software and carry out all updates to make sure SDD software is at the very latest level. We will then register you and your workshop  with TOPiX and create the account then you can make payment for a 1 Year subscription to the Diagnostic/Programming platform SDD.
SDD requires a internet connection and login each time you use it and for diagnostic and programing Functions.

1 Year Diagnostic & Programming Subscription 1348.50GBP Inc. Tax

Software will update automatically and needs to be connected with internet to perform update downloads. (we advise this is done every week at least once).

We will also add a desktop link to software downloads where they can manually be downloaded and installed.

Please Note:
If you wish to carry out security functions you will need to complete and return a application form for Accreditation and provide proofs of ID's. The charge at the time of publishing this is 150.00 GBP Plus VAT. (THIS IS NOT INCLUDED IN THIS BUNDLE).

Forms for accreditation will be provided with this package.