JLR SST Jaguar Land Rover Small Service Tool - With Pass Thru
Prices are Subject to 20% VAT (UK Customers Only) Other countries May Be Subject to Import Duties and Local Taxes,
Jaguar Land Rover Approved device
Operates standalone with special applications: DEF, DPFDR, EPBR, Oil Level, SIR, TM Toggle, TTM Toggle, Force Ignition.
The JLR SST is a simple to use hand-held device designed to allow the service technician to quickly and simply carry out general daily service functions using applications approved by Jaguar Land Rover.
The JLR SST hand-held device operates independently without any need to be connected to the approved diagnostic system or a PC. The JLR SST hand-held device connects directly to the vehicle via the diagnostic connector and can be controlled using the keypad.
Whats in the box:
1 x SST Main Hand Held Device
1 x2m USB Cable
Approved Jaguar & Land Rover Vehicle Application List
JLR SST Service Applications
SIR – Service Interval Reset
This application resets the service light and/or oil change reset depending on the vehicle.
EPBR – Electronic Park Brake Release
Moves the electronic park brake to the mount position and then releases the brake calipers.
DPFDR – DPF Dynamic Regeneration
The DPFDR application allows the vehicles DPF dynamic regeneration process to be undertaken to clear the DPF of soot build up.
Oil Level Measurement
Displays current engine oil level instantaneously on screen with a bar graph and actual levels.
Diesel Exhaust Fuel (DEF)
Allows the Diesel Exhaust Fluid (DEF or AdBlue®) level to be constantly monitored, and displays the amount required to refill the tank.
TM Toggle – Transport Mode Toggle
The Transport Mode Toggle application allows the vehicle to be placed in and out of Transport mode including speed limit and air suspension depending on vehicle variant.
TTM Toggle – Tight Tolerance Mode Toggle
The Tight Tolerance Mode Toggle application allows the vehicle to be placed in and out of Tight Tolerance mode depending on vehicle variant.
The Force Ignition Application turns the vehicles ignition on and holds it in the on position for as long as the JLR SST is connected to the vehicle and the application is running.
Can also be connected to Hub Software for App updates and firmware upgrades when available.
JLR SST App Hub Setup
The JLR SST App Hub is a PC based application that is installed to allow you to check for software updates with release information for your JLR SST device.The PC that this application is installed on needs to be connected to the internet to allow software updates to be downloaded automatically to your JLR SST device.Please Note : After installation of the JLR SST App Hub you need to connect your JLR SST device to your PC via the USB cable BEFORE you run the JLR SST App Hub for the first time. This is necessary to complete the device driver installation.
PASS-Thru with JLR/SSD
This device can be connected to a Laptop via the supplied USB cable and can then act as a Davina4 Pass-Thru device to be used with JLR SDD software with same functions as JLR VCI.
This cannot be used standalone for Reading & Deleting Fault Codes from modules, for this function must be used in conjunction with JLR/SSD & Laptop.
Please provide registration details at checkout as unit will be registered and download with Apps before sending out.